Newsletter
Store home > Networking > Office Networking > Monitoring op afstand > Intelligent Digital I/O Sensor
Intelligent Digital I/O Sensor
Foto kan afwijken van werkelijk product
Intelligent Digital I/O Sensor
 

Intelligent Digital I/O Sensor


Use only one ServSensor hub port to add 8 dry contacts


  • Indicates ALARM or NORMAL.
  • Add up to 8 dry contacts per ServSensor RJ45 hub port.
  • Full autosense including disconnect alarm.
  • Current Range can sink up to 20mA.
  • No external power required.
  • Garantie: 25 Year Double Diamond™ Warranty (Standard)
   
  Product       Code   Stuksprijs   Aantal  
 
 
(8) dry contacts for TB
  Intelligent Digital I/O Sensor  
Intelligent Digital I/O Sensor
  EME1J8-005      
 
(2) RJ-45 to (8) dry contacts
  Intelligent Digital I/O Sensor  
Intelligent Digital I/O Sensor
  EME1KJ8-005      

Accessoires

  Product     Code   Stuksprijs   Aantal  
 
  AlertWerks Single Dry-Contact Sensor - 4.5m
AlertWerks Single Dry-Contact Sensor
  EME1K1-015      

With the Digital I/O sensors, you can have 8 dry contacts on one a single port of the Alert Werks II ServSensor Hubs. The main housing can be mounted on a wall with a standard CAT5 cable connection to your sensor hub. Connect up to eight Digital I/O Sensors per each ServSensor Hub for a total of 64 dry contacts.
There are two versions available: Both models supply at one end a single RJ45 connector for the hub connection. On the other end the first models supplies 8x 2 pin dry contact connectors while the second model features two RJ45 connectors, each compatible with up to 4 Alterwerks II dry contacts sensors (EME1DC or EME1K1).

The dry contacts can be configured as inputs or outputs. Each of the 8 dry contacts can also be configured as outputs up to 20mA. The Intelligent Digital I/O Sensor is user definable and can be used to detect many different inputs such as UPS status, security systems, alarm panels or air conditioning status.

Typical applications:
- SNMP interface for alarm/normal status.
- SNMP traps sent when critical.
- SNMP polling via get command.
- When an alarm condition is activated the description and location of the fault can be sent via email, SMS, MMS, Skype, phone calls and other advanced notifications from the ServSensor Hub’s web interface.

This product works with:
AlertWerks ServSensor V4E Hubs (EME134A-R2, EME134A, EME144A, EME129A-20-R2 to EME129A-60-R2, EME129A-20 to EME129A-60)

 
Acties
Black Box verklaart
Recent bekeken producten:
Temperature and Humidity Sensor String (6) Sensors for AlertWerks   Temperature and Humidity Sensor String (6) Sensors for AlertWerks