A great choice for factory, utility, and engineering applications, the Black Box® Industrial-Grade USB Hub enables more reliable USB device connectivity in harsh environments.
The hub expands one USB port into four or seven, so you can connect additional USB peripherals to your host system via its upstream port. Considerably more rugged than ordinary, office-grade USB hubs, it’s designed to allow you to operate USB peripherals in areas with lots of electromagnetic interference (EMI) and prevent data errors caused by such interference.
Tested to meet heavy industrial EMC standards, the hub is also designed to prevent ESD (electrostatic discharge) from damaging your connected USB devices—which makes it ideal for use near electronically noisy motor controls, variable frequency drives, and equipment with large electrical loads.
Because the hub has high-retention ports for device connections, standard USB cables are a lot less likely to shake loose—even in environments with lots of equipment vibration. (Disconnecting them requires up to 1.5 kg of force.) Cables click into the ports securely to help eliminate data loss.
Also, because it can be powered via the USB bus, you don’t need to locate it next to a power outlet. But, if your downstream USB devices require extra power, the hub can be used with an external power supply. Through its terminal block input or locking barrel plug, it receives power externally from a 10–30-VDC source.
When the hub is using USB bus power, it provides a maximum of 100 mA to each downstream port; when powered externally, it provides 500 mA to each downstream port.
The hub includes hardware for mounting, including a DIN rail mounting bracket and panel-mount brackets.
MTBF — 211,773 hours (MIL 217F parts count reliability calculated)
Standards — USB 1.1, USB 2.0
USB Interface ESD — 15 kV (air), 8 kV (contact)
USB Interface Surge Protection — +/- 0.5 kV (DC ports), +/- 1 kV (signal ports)
USB Speed (Maximum) — 480 Mbps
Connectors —
Upstream port: (1) USB Type B F (high retention with withdrawal of >15 N);
Downstream ports: (4) or (7) USB Type A F (high retention with withdrawal of >15 N)
Indicators — (6) LEDs: (1) USB Bus Power, (1) External Power, (7) USB Port Ready
Operating Environment —
Temperature: -40 to 80° C (: -40 to 176° F);
Humidity: 0 to 95%, noncondensing
Power — Input: From the USB bus or from separate external 10–30-VDC power supply* (via a terminal block or locking barrel plug input);
Output: 5 VDC
Size —
ICI200A: 3.6H x 14W x 8.8D cm (1.4"H x 5.5"W x 3.5"D)
ICI207A: 3.49H x 20,3W x 12.07D cm (1.38"H x 8"W x 4.75"D)
Weight — 0.6 kg (1.4 lb.)
Winkelwagen
Inloggen
Neem contact op
