Approvals — FCC, CE and RoHS
Connectors —
Transmitter EMD4000T:
(1) DisplayPort; (1) USB Type B, (2) 3.5mm audio jacks, (1) DB9 serial, (1) RJ-45, (2) SFP+ slots, (1) Power
Receiver EMD4000R:
(1) DisplayPort; (4) USB Type A, (2) 3.5mm audio jacks, (1) DB9 serial, (1) RJ-45, (2) SFP+ slots, (1) Power
Distance — Distance between Transmitter and Receiver:
in IP mode: Unlimited using IP rules;
in Direct Connect mode:
CATx: 100 m;
Fibre: 300 m to 10 km, based on SFP used
Indicators — (1) single bi-color LED (green/red):
Resolution max. — 4K 4096 x 2160 @ 60 Hz
Housing — Aluminum outer case with plastic bezel
Operating Systems supported —
Microsoft Windows Vista, XP, Windows 7, Windows 8, Server 2003, Server 2008, Server 2012, Linux, Solaris, Mac OS
Operation —
Default IP Address for Transmitter:192.168.1.22;
Default IP Address for Receiver: 192.168.1.21;
Default Username: admin;
Default Password: Blank password by default, just press the Enter key;
EDID Support — Internal EDID table in Transmitter (can be updated from a Receiver or manager);
Encryption —Secure Sockets Layer (SSL) over a TCP/IP up to 128-bit for transmitter to receiver with virtualized targets, depending on configuration
Environmental —
Temperature: 0 to 40°C operating; -20 to 60°C storage;
Relative Humidity: 5 to 95% non condensing
Dimensions — Each unit 39 x 216 x 187 mm HxWxD
Weight —
Transmitter: 1,14 kg
Receiver; 1,16 kg
EMD4000-KIT
Connectors
Transmitter: (1) DisplayPort; (1) USB Type-B; (2) 3.5mm Audio Jack; (1) DB9 Serial; (1) RJ45; (2) SFP+ slot; (1) Power;
Receiver: (1) DisplayPort; (4) USB Type-A; (2) 3.5mm Audio Jack; (1) DB9 Serial; (1) RJ45; (2) SFP+ slot; (1) Power
Dimensions – Receiver: 1.5" H x 8.5" W x 7.4" D (3.9 x 21.6 x 18.7 cm)
Dimensions – Transmitter: 1.5"H x 8.5"W x 7.4"D (3.9 x 21.6 x 18.7 cm)
Indicators: (1) Single Bi-color LED (Red/Green)
Weight – Receiver: 2.55 lb. (1.2 kg)
Weight - Transmitter: 2.5 lb. (1.1 kg)
Compatibility Note:
- Emerald4K_Firmware_v6.0 firmware is compatible with other 6.0 endpoints.
- The EMD4000R can connect to the EMD4000T, EMD200DV-T, Emerald SE/PE Transmitters using 6.x firmware or higher, but not to an Emerald SE/PE Receiver to an EMD4000T.
- Firmware 6.0 is not compatible with Firmware 1.4.
- EMD4000T cannot be accessed by any version of RemoteApp to date.
TAA compliant — YES